Ionic UV Air Purifier with Carbon Filter 113
|FOB Price:||US $75 / Piece|
|Min. Order:||500 Pieces|
|Min. Order||FOB Price|
|500 Pieces||US $75/ Piece|
|Transport Package:||53 35 52cm|
|Payment Terms:||T/T, Paypal, Western Union|
- Model NO.: 113
- Usage: Home
- Type: Anion
- Application Area: 21-30m²
- Operating Principle: Active + Passive
- Anion Density: >4000000pcs/m³
- Capacity (Cfm): 99.9
- Weight: 2.5kg
- Specification: CE, ROHS
- HS Code: 84213990
- Structure: Wall Mounted
- Air Volume: <50m³/h
- Certification: CE
- Power Source: AC Source
- Purifying Technology: UV
- Rating Voltage: AC110-240V
- UV: Yes
- Trademark: M Fresh
- Origin: Beijing China
|RESET Button||Resets the unit for operation .Button must be pressed after filter replacement and changing carbon pre-filter.|
|POWER Button||Turns unit ON or OFF|
|CHANGE Icon||Illuminates indicating filter change is needed for either HEPA or CARBON filter|
|UV-C Icon||UV-C icon illuminates when UV-C light is ON|
|SPEED Button||Provides 3 choices for airflow fan speed .LOW-MED-HIGH|
|FAN SPEED Indicators||Illuminate to show the selected airflow fan speed LOW-MED-HIGH|
|UV-C Button||Turn the UV-C lamp ON/OFF|
1. First step: Pre-filter: it uses micron mesh filter, effectively resists fiber particulate matter which is bigger than 0.28mm,
the blocking rate is over 99.90%.It is convenient to wash and clean over tens of thousands of items.
It can prevent big particles in the air, such as hair, dandruff, coarse grains and fine dust. Also,
it can protect the other filter.
2. Second step:
High-performance HEPA filter,a diameter of more than 0.25 micron particulate matter removal efficiency of 99.99%,
and professional removal of dust and respirable particulate matter.
In line with European standards,far exceeding the provisions of PM2.5 air quality detection.Excellence dust effect, to eliminate dust pollution on the lungs,
the complete elimination of the threat of dust.
Removal of 99.99% allergens and bacterial in the air,
such as dust,smoke,pollen,pet hair,bacterial and mold spores.
3. Third step:
Activated Carbon filter:
can remove 99.00% free formaldehyde,benzene,ammonia and TOVC etc,,harmful substance, characteristic mix and adsorptive capacity can be comprehensive purifier air.
UV-C Light Bulb
A UV-C and HEPA filtration product that removes many microorganisms from the air that pass through the system.
UV-C light is used by hospitals for sanitization,to help reduce the transmission of germs that can cause colds or flu.
Before first use
Tools Required for Assembly (not included) : Phillips screwdriver,Pencil Helpful Tools (not included):Cordless power drill with screwdriver attachment Unit must be mounted in at least 1/2 inch drywall or wood
1, Select wall location and mark screw placement on wall.(Fig.5)
2,Drill 3/16 (0.1875) inch holes.(Fig.6)
3, Install screw anchors(M).(Fig.7)
4,Align wall-mount plate (I)with holes .
Install screws(N) into the wall-mount plate(I)
And screw into wall.(Fig.8)
*Wall-mount plate(I)should point downward.
*Do not intall screw into top hole during this step.
5, Alian wall-mounting holes(G) located on
unit with round tabs of wall-mount plate(I).
Push unit onto tabs and pull unit down to
secure on wall-mount plate(I).(Fig.9)
6. Locate locking tab(O). Slide locking tab(O)
Securely into top of unit (Fig.10)
7,Line up the hole in the locking tab (O) with
the hole in the wall-mount plate(I).Secure
Screw(N)through locking tab (O)and
wall-mount plate(I).Screw into wall using
Phillips head screwdriver (or cordless power
drill with screwdriver attachment).(Fig.11)
8,Check to make sure the unit is locked in place.
Using air purifier
Unit can be used horizontally , on a flat , level and solid surface such as a desk, table or dresser
Unit can be mounted on a wall. For complete wall-mount instructions see Page 8.
Unit can be used vertically on a flat . Level and solid surface,such as a desk ,table or dresser
Press the POWER button to turn the unit ON.
Hold the POWER button down for 2 seconds to turn the unit OFF.
Press the SPEED button to select LOW MED or HIGH airflow fan speed.
From the LOW position,press once to move to MED.Press a second time
to move output to HIGH.Press a third time to move from HIGH back to LOW.
When the CHANGE filter icon light is on, replace the designated filter (HEPA or CARBON)
And press the RESET button with a pointed tool .
Hold RESET button down for 1 second or until the light resets.
When the HEPA and CARBON PRE-FILTER lights are on.
press the RESET button once and the lights will go off .(Fig.3)
*RESEET button works only when the CHANGE filter icon is on.
UV-C Light Button
Press the UV-C light button to turn ON the lamp. Press the button a
second time to turn the UV-V light OFF .(Fig.4)
Filter Cleaning and Replacement Cycles
|FILTER CLEAN/CHANGE CYCLE CLEAN/CHANGE|
|Carbon Pre-Filter||Every 6 months||Replacement|
|HEPA Filter||Every 12-18 months depending on use. Vacuum every 3 months||Replacement|
l The recommended filter replacement cycles may differ depending on the operation environment.
l The recommended filter replacement cycles are according to proper care and maintenance in normal environment.
Correct disposal of this product
This marking indicates that this product should not be disposed with other household wastes. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. They can take this product for environmental safe recycling.
Noted: BULB CONTAINS MERCURY
MERCURY WARNING: This device contains mercury in the sealed ultraviolet bulbs.Do not place your used bulbs in the trash. Dispose of properly.